Copying
78
2
G Place original, and then press the {Start} key.
Note
❒ You cannot use the bypass tray with this function.
❒ When placing originals on the exposure glass or in the ADF using the
Batch function, press the {q} key after all the originals have been scanned.
❒ The machine sets the reproduction ratio automatically to fit the paper size.
Reference
“Edit”, General Settings Guide
Margin Adjustment
You can make a binding margin.
A Press [Edit / Stamp].
B Press [Margin Adjustment].
C Set a binding margin for a front page. Press [←] and [→] when setting the
left and right margins, and [↓] and [↑] when setting the top and bottom margins.
D Set a binding margin for the back side pages. Press [←] and [→] when set-
ting the left and right margins, and [↓] and [↑] when setting the top and bot-
tom margins, and then press [OK].
Margin on the back side of the page is valid when [2 Sided] or [Combine 2 Side]
is selected.
E Press [OK].
To Next Page
Loading...
