Ricoh MP 2510 - When Copying Onto Regular Size Paper

Copying from Paper Tray 2
27
2
When copying onto regular size paper
Makes copies onto regular size paper from Paper Tray 2.
A Select tray 2, and then press the {q} key.
B Press [Select Size].
C Select the paper size.
D Press [OK].
E Press [OK].
F Place originals, and then press the {Start} key.
Note
❒ Steps
B
to
D
are not necessary if the size displayed on the key for tray 2 and
that of the paper set in tray 2 are the same.
❒ You can also specify the size of paper directly, using the paper size selector
for tray 2.
❒ Some kinds of envelopes might cause misfeeds and wrinkles. If this hap-
pens, push down the fusing unit's green lever. See “Envelopes”. Also, be
sure to place the front face of the envelope upward.
Reference
p.30 “Envelopes”