Copying
44
2
Preset Reduce/Enlarge
Reduces or enlarges images. You can select a preset ratio for copying.
❖ Base Point
The base point of Reduce/Enlarge differs depending on how the original is
scanned. When the original is set on the exposure glass, the upper left corner
will be the base point. When it is set to ADF, the bottom left corner of the orig-
inal will be the base point.
Shown below are the resulting copy images that differ depending on how the
original is scanned.
1 Base point when placed on the exposure glass.
2 Base point when placed in the ADF.
A Press [Reduce / Enlarge].
B Press [Reduce] or [Enlarge].
C Select a ratio, and then press [OK].
GCKA031e
To Next Page
Loading...
