Copying
80
2
Note
❒ The erase width is set to 10 mm (0.4 inch) as a default. You can change this set-
ting with Edit under User Tools Menu (Copier and Document Server Features).
❒ The relationship between the original orientation and the erased part is as follows:
1 Erased part
2 2-99 mm (0.1"-3.9")
Reference
“Edit”, General Settings Guide
Border Erase (same width)
This mode erases the edge margin of the original image.
A Press [Edit / Stamp].
B Press [Erase].
C Press [Same Width].
D Set an erase border width with [n] or [o].
L original K original
To Next Page
Loading...
