5
❖ Reproduction Ratio
❖ Edit
Item Description
Shortcut R / E You can register up to three frequently used Reduce/Enlarge ra-
tios other than the fixed Reduce/Enlarge ratio and have them
shown on the initial display.
Enlarge 1-5 You can customize available enlargement ratios by pressing [Re-
duce / Enlarge], followed by [Enlarge].
Priority Setting: Enlarge You can set the ratio with priority when [Reduce / Enlarge] is
pressed, followed by [Enlarge].
Reduce 1-6 You can customize available reduction ratios by pressing [Reduce /
Enlarge], followed by [Reduce].
Priority Setting: Reduce You can set the ratio with priority when [Reduce / Enlarge] is
pressed, followed by [Reduce].
Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Mar-
gin in a shortcut key.
R / E Priority You can specify which tab has priority on the display panel when
[Reduce / Enlarge] is pressed.
Item Description
Front Margin: Left / Right Specify left and right margins on the front side of copies in Margin
Adjustment mode.
Back Margin: Left / Right Specify left and right margins on the back side of copies in Margin
Adjustment mode.
Front Margin: Top / Bottom
Specify top and bottom margins on the front side of copies in Mar-
gin Adjustment mode.
Back Margin: Top / Bottom
Specify top and bottom margins on the back side of copies in Mar-
gin Adjustment mode.
1 Sided→2 Sided Auto
Margin: TtoT
When using the 1 sided → 2 sided Duplex function, you can specify
the margins on the back side. The margin is set to the same value
of “Back Margin: Left / Right”.
1 Sided→2 Sided Auto
Margin: TtoB
When using the 1 sided → 2 sided Duplex function, you can specify
the margins on the back side. The value set for “Back Margin: Top
/ Bottom” is used.
Erase Border Width Specify the width of the erased border margins using this function.
Erase Original Shadow in
Combine
In Combine Copy or Booklet/Magazine Copy mode, you can spec-
ify whether to erase a 3 mm, 0.1" bounding margin around all four
edges of each original.
Erase Centre Width Specify the width of the erased centre margins using this function.
Image Repeat Separation
Line
You can select a separation line using the Image Repeat function
from: None, Solid, Broken A, Broken B, or Crop Marks.
Double Copies Separation
Line
You can select a separation line using the Double Copies function
from: None, Solid, Broken A, Broken B, or Crop Marks.
Separation Line in Combine
You can select a separation line using the Combine function from:
None, Solid, Broken A, Broken B, or Crop Marks.
Copy on Designating Paper
Specify whether to copy onto slip sheets.
To Next Page
Loading...
