7
❖ Input / Output
❖ Administrator Tools
Stamp on Designating
Slip Sheet
You can print the page number onto slip sheets when using the
Designate function and the Page Numbering function together.
Stamp Position You can set the position where the stamp is printed.
Superimpose You can have page numbers printed in white when they overlap
black parts of the image.
Page Numbering Initial
Letter
You can select the page numbering initial letter between “P1, P2.../
P.1, P.2...” and “S1, S2.../ S.1, S.2...”.
Item Description
Switch to Batch You can select to have Batch mode or SADF mode displayed when
you press [Special Original].
SADF Auto Reset When you set one original at a time in the ADF, the Auto Feed in-
dicator lights for a specified time after an original is fed, to show
the ADF is ready for another original. You can adjust this time from
3 to 99 seconds in increments of 1 second.
Rotate Sort: Auto Paper
Continue
Specify to continue copying when paper of the required orienta-
tion has run out during rotate sort.
Auto Sort You can specify whether the Sort function is selected when the ma-
chine is turned on, or the functions are cleared.
Memory Full Auto Scan
Restart
When memory becomes full while scanning originals, the machine
can make copies of scanned originals first, and then automatically
proceed scanning remaining originals.
Select Stack Function
Specify whether Stack or Rotate Sort has priority on the initial display.
Letterhead Setting If you select [Yes] in this function, the machine rotates the image
correctly.
Item Description
Menu Protect Using Menu Protect, you can prevent unauthenticated users from
changing the user tools.
Item Description
To Next Page
Loading...
