Copying
28
2
When copying onto custom size paper
Makes copies onto custom size paper from Paper Tray 2.
Important
❒ If [2 Sided] is selected for copying in [Dup./Combine/Series] (for example [1 Sid-
ed] → [2 Sided]), select [1 Sided] for copying (for example [1 Sided] → [1 Sided]).
❒ Paper will be delivered automatically to the internal tray.
A Select tray 2, and then press the {q} key.
B Press [Custom Size].
C Enter the vertical size of the paper with the number keys, and then press
the {q} key.
D Enter the horizontal size of the paper with the number keys, and then press
the {q} key.
E Press [OK].
F Place originals, and then press the {Start} key.
Note
❒ If you make a mistake in step
C
or
D
, press [Clear] or the {Clear/Stop} key,
and then enter the value again.
❒ To register the custom size entered in
D
, press [Program] and then press [Ex-
it] in the confirmation screen.
❒ Only one custom size can be stored.
❒ To recall the custom size stored, press [Recall].
❒
If you do not register the custom size, the size you set is deleted when modes are cleared.
To Next Page
Loading...
