Message Problem and solutions
number, or the network connection and
configuration.
SMTPC: username or password wasn't correct.
[response code] (information)
Connection to the SMTP server failed, because the
specified SMTP user name is incorrect, or the
specified SMTP password is incorrect. Check the
SMTP user name and password.
Snmp over IPv4 is ready Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready. Communication over IPv6 with snmp is available.
Snmp over ipx is ready. Communication over IPX with snmp is available.
snmpd start. The snmpd service has started.
started. The direct print service has started.
Started. The bonjour (rendezvous) function is enabled.
stopped The supplicant is terminating.
success key received The supplicant received the EAP-Success key.
success but invalid key The supplicant received a message reporting that
EAP authentication was successful, but the EAPOL
key was invalid.
Terminated. The bonjour (rendezvous) function is disabled.
There is problem in dhcp server operation. There is a problem with the DHCP server.
If multiple DHCP servers are active on the network,
check that they are assigning unique IP addresses
to each machine.
trap account is unavailable. v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
unauthenticated The authentication failed. The supplicant was
denied access to the access point, or was not
authenticated.
waiting for keys The supplicant is waiting for the session key.
WPA supplicant started The WPA supplicant has started.
2. Monitoring and Configuring the Printer
128
To Next Page
Loading...
Need help?
General