Ricoh MPC6000 User Manual

Message List
This is a list of messages that appear in the machine's system log. The system log can be viewed using the
“syslog” command.
System Log Information
Use the following command to display the system log information:
• UNIX: Use the “syslog” command and “rsh”, “rcp”, “ftp”, and “sftp” parameters.
• telnet: Use the “syslog” command.
Message Problem and solutions
account is unavailable:
Same account name be used.
User account is disabled. This could be because it
use the same account name as the administrator
account.
account is unavailable:
The authentication password is not set up.
User account is disabled. This could be because the
authentication password is not set, and only the
encryption account is set.
account is unavailable:
encryption is impossible.
Encryption is not possible and account is disabled.
This could be because:
• Security option is not installed.
• Encryption password has not been specified.
add_sess_IPv4: bad trap <IPv4 address>
community <community name>
The IPv4 address (0.0.0.0.) is unavailable when the
community access type is TRAP. Specify the host
IPv4 address for the TRAP destination.
add_sess_IPv6: bad trap <IPv6 address>
community <community name>
The IPv6 address [::] is unavailable when the
community access type is TRAP. Specify the host
IPv6 address for the TRAP destination.
add_sess_IPv4: community <community name>
already defined.
The same community name already exists. Use
another community name.
add_sess_IPv6: community <community name>
already defined.
The same community name already exists. Use
another community name.
add_sess_IPX: bad trap <IPX address>
community <community name>
The IPX address (00:00:00:00:00:00) is
unavailable when the community access type is
Message List
123
2

Ricoh MPC6000 Specifications

General

Brand	Ricoh
Model	MPC6000
Category	Printer
Language	English