• For details about login user names and passwords, see Security Reference, which is the administrator's
manual.
• For details about Web Image Monitor, see “Using Web Image Monitor”.
• For details about setting items, see Help in the [General Settings] on [Configuration] page.
• p.21 "Using Web Image Monitor"
Managing User Information
Follow the procedure below to manage the user's information using SmartDeviceMonitor for Admin.
Prints jobs can be managed and functions restricted by user codes.
Starting User Management Tool
Follow the procedure below to start User Management Tool.
1. Start SmartDeviceMonitor for Admin.
2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
3. In the list, select a machine you want to manage.
4. On the [Tools] menu, click [User Management Tool].
A Web browser opens and the window for entering the login user mane and password for the Web
Image Monitor administrator appears.
5. Enter the user name and password, and then click [Login].
For details about the user name and password, consult your network administrator.
User Management Tool starts.
2. Monitoring and Configuring the Printer
40
To Next Page
Loading...
