Ricoh MPC6000 - Dhcp6

Current interface priority configuration display
msh> dhcp priority
Interface priority configuration
msh> dhcp priority “interface_name”
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
DNS server address selection
msh> dhcp dnsaddr {dhcp|static}
• Specify whether to obtain the DNS server address from the DHCP server or use the address set
by a user.
• To obtain the DNS server address from the DHCP server, specify “dhcp”. To use the address set
by a user, specify “static”.
Domain name selection
msh> dhcp domainname {dhcp|static}
• Specify whether to obtain the domain name from the DNS server or use the domain name set
by a user.
• To obtain the domain name from the DHCP server, specify “dhcp”. To use the domain name set
by a user, specify “static”.
• p.70 "dns"
• p.71 "domainname"
• p.144 "Using DHCP"
dhcp6
Use the “dhcp6”command to display or configure DHCPv6 settings.
View settings
The following command displays the current DHCPv6 settings.
msh> dhcp6
DHCPv6-lite configuration and display
msh> dhcp6 “interface_name” lite {on|off}
Viewing and specifying DNS server address selection (obtained from the dhcpv6 server/user
specified value)
msh> dhcp6 dnsaddr {dhco|static}
2. Monitoring and Configuring the Printer
68
2