• Under Windows 95/98/Me, clear the [Form feed] check box on the [Printer Settings] tab in the
printer properties dialog box.
• Under Windows 2000/XP and Windows Server 2003, clear the [Form feed] check box on the
[NetWare Settings] tab in the printer properties dialog box.
• Under Windows NT 4.0, clear the [Form feed] check box on the [NetWare Settings] tab in the printer
properties dialog box.
Banner page
You should not configure a banner page on NetWare. If you want to change the banner page setting,
always configure it using Windows.
• Under Windows 95/98/Me, clear the [Enable banner] check box on the [Printer Settings] tab in the
printer properties dialog box.
• Under Windows 2000/XP and Windows Server 2003, clear the [Enable banner] check box on the
[NetWare Settings] tab in the printer properties dialog box.
• Under Windows NT 4.0, clear the [Enable banner] check box on the [NetWare Settings] tab in the
printer properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the connection from the print server will be cut off for about 30-40 seconds
before re-connecting. Depending on the NetWare specification, print jobs may be accepted, but they will
not be printed during this interval.
When using the machine as a remote printer, wait about two minutes after resetting before attempting to
print.
When the IEEE 802.11 interface unit is installed
When using the wireless LAN interface on the network, note the following:
When moving the machine
Detach the antennas when relocating the machine locally.
After moving the machine, reattach the antennas, ensuring that:
• The antennas are positioned clear of obstacles.
• There is 40 to 60 mm between the antennas, so that they do not touch.
• The exposure glass cover and the Auto Document Feeder (ADF) do not knock the antennas.
Precautions
151