• If personal authentication (Basic, Windows, LDAP, or Integrated Server Authentication) is enabled,
only authenticated users (users authenticated by login user name and password) can log on.
• For “mput” command, “*” and “?” can be used as wild cards in file names.
• When printing a binary file in ASCII mode, print may not come out correctly.
• For details about registering the machine's host name to the host file, see “Using a Host Name Instead
of an IPv4 Address”.
• For details about login user name and password, see Security Reference, which is the administrator's
manual.
• For details about the virtual printer configuration, see “Using the Virtual Printer”, Printer Reference.
3. Special Operations under Windows
136
To Next Page
Loading...
