• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed.
• When both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• SMTP Server and Fax E-mail Account must be specified in order to send Internet Fax.
• When [POP before SMTP] is set to [On], you must also make settings for [Reception Protocol] and
[POP3 / IMAP4 Settings].
• When [SMTP Authentication] is set to [On], you must also make settings for [Administrator's E-mail
Address].
• When setting [POP before SMTP] to [On], check POP3 port number in [E-mail Communication Port].
• If [Delivery Option] is set to [On], check that IPv4 Address is specified.
4. Appendix
172
To Next Page
Loading...
Need help?
General