To Next Page

To Previous Page

25. Enter the printer server name as the context name, and then press the [Enter] key.

26. Select the printer name on the context menu, and then press the [Enter] key.

Setting up using Web Image Monitor

1. Start Web Image Monitor.

2. Click [Login].

A dialog box for entering the login user name and login password appears.

3. Enter the user login name and password, and then click [Login].

For details about the login user name and password, consult your network administrator.

4. Click [Configuration] in the left area, and then click [NetWare Print Settings].

5. Confirm the settings, and then click [Device Name].

Configuration is now complete. Wait several minutes before restarting Web Image Monitor.

6. Click [Logout].

7. Quit Web Image Monitor.

• If you cannot identify the printer you want to configure, check the printer name against the

configuration page printed from the printer. For details about printing a configuration page, see

“Printing the Configuration Page”, General Settings Guide.

• If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer.

Use the [Network] dialog box of Windows to change the frame type of the computer.

• For details about Web Image Monitor, see “Using Web Image Monitor”.

• For details about login user names and passwords, see Security Reference, which is the administrator's

manual.

• p.21 "Using Web Image Monitor"

1. Using a Printer Server

Ricoh MPC6000 User Manual

Questions and Answers: