Ricoh MPC6000 - Page 97

Parameter Value configured
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
domain “character string” You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (31 bytes), but not “@” or “\”.
The default is blank.
password “character string” You can specify the login for the Radius server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
srvcert {on|off} You can set the server certificate. The default is
“off”.
imca {on|off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is “off”.
srvid “character string” You can set the server ID and subdomain of the
certificate server.
Usable characters: ASCII 0x20-0x7e(128
bytes). The default is blank.
connectinfo Obtains connection information.
claer {a each command|all} Returns the selected setting to its default value.
If you specify “all”, all settings will be restored
to their default values.
miccheck {on|off} You can enable or disable the MIC check
function.
The default setting is “On” (enabled).
If you specify “Off”, you cannot perform MIC
checks. We recommend you specify “On” for
the MIC check function when using this machine.
Remote Maintenance by telnet
95
2