3. Press 05: [Machine: Maintenance].
4. Press 0703: [Back Up / Restore Custom Paper Data].
5. Press [Back Up Custom Paper Settings].
6. Press [OK].
Restoring the Data
1. Insert the SD card containing the backup custom paper profiles into the SD card slot on the
side of the control panel.
2. Cancel all custom paper profiles allocated to paper trays.
3. Open the [Adjustment Settings for Skilled Operators] menu.
4. Press 05: [Machine: Maintenance].
5. Press 0703: [Back Up / Restore Custom Paper Data].
6. Press [Restore Custom Paper Settings].
7. Press [OK].
• If a previously created backup file is on the SD card, it is overwritten by the back-up.
• All custom paper profiles registered in the machine are overwritten during the data restoration.
• The backup data is restored under the registration number allocated at the time of the back-up.
Backing up and Restoring Custom Paper Profiles Using the External
Controller's Control Panel
Using the external controller's control panel, you can back up and restore custom paper profiles
associated with the external controller's paper catalog data. For details, see the external controller's
instruction manual.
Backing up and Restoring Custom Paper Profiles
101
To Next Page
Loading...
