Line Speed Adjustment
To prevent the paper becoming too tight or too slack during transfer, set all the line speed adjustment
settings for the paper transfer path to the same value. However, if adjustment of individual items is
necessary to correct image degradation, perform the adjustment according to the instructions in
Troubleshooting.
064: [Fusing Belt Feed Speed]
Adjust the fusing belt's speed.
Press [+] to increase the speed and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Fusing Belt Feed Speed] 10.0 -10.0 0.1 %
069: [Paper Transfer Belt Feed Speed]
Adjust the transfer roller's speed.
Press [+] to increase the speed and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Belt Feed Speed] 1.0 -1.0 0.01 %
070: [First Paper Motor Feed Speed]
Adjust the first paper feed motor's speed.
Press [+] to increase the speed and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[First Paper Motor Feed Speed] 3.0 -3.0 0.1 %
071: [Second Paper Motor Feed Speed]
Adjust the second paper feed motor's speed.
Press [+] to increase the speed and [−] to reduce it.
Setting Values
119
To Next Page
Loading...
