Ricoh Pro C5200s Operating Instructions

• [Middle]
50 cpm
• [Low]
32 cpm
Pro C5210S
• [High]
80 cpm (full speed)
• [Middle]
55.8 cpm
• [Low]
35.7 cpm
• In some cases, if you change this setting from [Low] to [Middle] or from [Middle] to [High], the
toner may not properly fuse to the paper.
• Depending on the type of paper, you can increase the toner gloss by changing this setting from
[High] to [Middle] or from [Middle] to [Low].
Setting Items Values
[Process Speed Setting] [Low]
[High]
[Middle]
Toner Adhesion Adjustment
011: [Maximum Image Density: K]
Adjust the intermediate transfer belt toner adhesion for black.
Use this to adjust the density and color of the printed image. Depending on the paper being used, it may
be necessary to make this adjustment to achieve optimal toner adhesion.
Press [+] to increase the toner adhesion and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Maximum Image Density: K] 5 -5 1 None
4. Details of Menu Items in Advanced Settings
128

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes