paper with a feed length of more than 220 mm (8.66 inches) is used, both Shift Systems 1 and 2
can be used.
• Enter the same value as that for 098: [2 Sided Transport Roller Shift 2].
Setting Items Max. Value Min. Value Step Unit
[2 Sided Transport Roller Shift 1] 3.0 -3.0 0.1 %
098: [2 Sided Transport Roller Shift 2]
Adjust the amount of roller shift for Shift System 2 in the duplex paper transfer unit.
Press [+] to increase the degree of shift and [−] to reduce it.
• The machine adjusts the vertical position of Side 2 (relative to the main scanning direction) by the
shifting movement of the horizontal duplex paper transfer unit for duplex printing. When paper with
a feed length of 220 mm (8.66 inches) or less is used, only Shift System 2 can be used. When
paper with a feed length of more than 220 mm (8.66 inches) is used, both Shift Systems 1 and 2
can be used.
Setting Items Max. Value Min. Value Step Unit
[2 Sided Transport Roller Shift 2] 3.0 -3.0 0.1 %
099: [2 Sided Transport Roller Shift Setting]
Disable the shift operation performed by the duplex transfer unit.
If set to [Deactivate], neither Shift System 1 or 2 operates.
Setting Items Values
[2 Sided Transport Roller Shift Setting] [Deactivate]
[Activate]
102: [Process Speed Setting]
Adjust the machine's copy/print speed.
Pro C5200S
• [High]
65 cpm (full speed)
Setting Values
127
To Next Page
Loading...
