Setting Items Max. Value Min. Value Step Unit
[2 Sided Switchback Motor Feed Speed:
CW]
3.0 -3.0 0.1 %
095: [2 Sided Switchback Motor Feed Speed: CCW]
Adjust the 2-sided switchback motor's speed (counterclockwise rotation).
Press [+] to increase the speed and [−] to reduce it.
If you change 090: [Switchback Entrance Motor Feed Speed], increase or decrease this speed by the
same amount.
Setting Items Max. Value Min. Value Step Unit
[2 Sided Switchback Motor Feed Speed:
CCW]
3.0 -3.0 0.1 %
096: [2 Sided Exit Motor Feed Speed]
Adjust the 2-sided exit motor's speed.
Two-Sided Exit Motor (exit motor for duplex printing) drives the rollers at the exit of the horizontal
duplex paper transfer unit.
Press [+] to increase the speed and [−] to reduce it.
If you change 075: [Registration Motor Feed Speed], increase or decrease this speed by the same
amount.
Setting Items Max. Value Min. Value Step Unit
[2 Sided Exit Motor Feed Speed] 3.0 -3.0 0.1 %
097: [2 Sided Transport Roller Shift 1]
Adjust the amount of roller shift for Shift System 1 in the duplex paper transfer unit.
Press [+] to increase the degree of shift and [−] to reduce it.
• The machine adjusts the vertical position of Side 2 (relative to the main scanning direction) by the
shifting movement of the horizontal duplex paper transfer unit for duplex printing. When paper with
a feed length of 220 mm (8.66 inches) or less is used, only Shift System 2 can be used. When
4. Details of Menu Items in Advanced Settings
126
To Next Page
Loading...
