Decurler Adjustment
100: [Paper Curl Correction Level]
Adjust the degree of paper decurling by the decurler unit.
Select between "1" (weak) and "5" (strong).
Setting Items Max. Value Min. Value Step Unit
[Paper Curl Correction Level] 5 1 1 None
101: [Paper Curl Correction Level Adjustment]
Adjust the contact pressure between the soft roller and metal roller in the decurler unit.
Use this to make fine adjustment in addition to the five-level adjustment made in 100: [Paper Curl
Correction Level].
Press [+] to increase the contact pressure and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Curl Correction Level Adjustment] 0.5 -0.3 0.1 mm
Finishing Position Adjustment
107: [Z-fold Position 1]
Adjust the width of the bottom end segment (S) of Z- folded sheets when using the multi-folding unit.
Press [+] to increase (S) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Setting Values
149
To Next Page
Loading...
