Pro C5210S
• [Do not Reduce]
80 cpm (full speed)
• [Reduce Level 1]
64 cpm (80% of full speed)
• [Reduce Level 2]
52 cpm (65% of full speed)
• [Reduce Level 3]
40 cpm (50% of full speed)
• The setting will take effect if the ambient temperature is higher than 17°C (62.6°F).
Setting Items Values
[Initial CPM Setting] [Do not Reduce]
[Reduce Level 1]
[Reduce Level 2]
[Reduce Level 3]
106: [CPM Setting when Temperature is Decreasing]
Adjust the threshold temperature at which to reduce the print speed at low temperatures.
If the temperature of the fusing unit decreases to this threshold, the machine will reduce the print speed in
order to increase the fusing level.
[Reduce Level 1], [Reduce Level 2], and [Reduce Level 3] are the defaults for each paper type and
paper weight.
If fusing errors occur at low temperatures, change the setting from the default to [In Low Temperature] to
reduce the print speed and increase the fusing level. This will help to prevent fusing errors.
Setting Items Values
[CPM Setting when Temperature is Decreasing] [Reduce Level 1]
[Reduce Level 2]
[In Low Temperature]
[Reduce Level 3]
4. Details of Menu Items in Advanced Settings
148
To Next Page
Loading...
