Paper Delivery Adjustment
068: [Paper Weight Detection]
Specify whether or not to detect the paper weight.
If set to [On], a message appears on the control panel when the paper weight sensor detects paper of a
weight other than that specified in [Tray Paper Settings].
Misdetection may occur for thin but heavy paper. If misdetection occurs, set this setting to [Off] to turn
the function off.
Setting Items Values
[Paper Weight Detection] [On]
[Off]
082: [Double Feed Detection]
Specify whether or not to detect double feeding of paper.
If this is set to [On], the machine stops when it detects paper double feeding, so as to prevent mixing of
unprinted paper.
Misdetection may occur for special paper (two-ply paper such as release paper). If misdetection occurs,
set this setting to [Off] to turn the function off.
Setting Items Values
[Double Feed Detection] [On]
[Off]
Image Position/Scaling Adjustment
001: [Image Position: Across Feed: Side 1]
Adjust the vertical position of the image to be printed on Side 1 of the paper.
Press [+] to shift the image to the top.
Press [−] to shift the image to the bottom.
Setting Values
113
To Next Page
Loading...
