2. Details of Menu Items in Adjustment
Settings for Skilled Operators
Menu Items and Functions
[Machine: Image Position]
For details about the following items, see page 27 "[Machine: Image Position]".
No. Item Description
0101 [Image Position: With
Feed]
Adjust the horizontal position of the print image.
0102 [Image Position: Across
Feed]
Adjust the vertical position of the print image.
0107 [Erase Margin: Leading
Edge/Trailing Edge]
Adjust the mask width at the leading edge, trailing edge,
left edge, or right edge of the image.
[Machine: Image Quality]
For details about the following items, see page 33 "[Machine: Image Quality]".
No. Item Description
0201 [Adjust Image Density/
DEMS]
Execute image density control manually.
DEMS can reduce the variations in thickness that occur in
the intervals between the photoconductor and
development sleeve operations.
0202 [Image Density Adjustment
Execute Interval]
Specify the number of sheets the machine prints in full
color before it automatically adjusts image density.
0203 [Maximum Image Density] Specify the adhesion of toner to the drum surface and
intermediate transfer belt when image density adjustment
is executed.
0204 [Line Width] Adjust the intensity of the laser for transferring image
data to the drum.
0205 [Density Difference: Across
Feed]
Adjust the image density difference between the top and
bottom of the image.
19
To Next Page
Loading...
Need help?
General
