Finishing Position Adjustment
For details about the following items, see page 149 "Finishing Position Adjustment".
No. Item Description
107 [Z-fold Position 1] Adjust the width of the bottom end segment of Z- folded
sheets when using the multi-folding unit.
108 [Z-fold Position 2] Adjust the overall fold size of Z-fold sheets when using
the multi-folding unit.
109 [Half Fold Position: 1 sheet
Fold]
Adjust the fold position of half fold sheets when using the
multi-folding unit.
110 [Letter Fold-out Position 1:
1 sheet Fold]
Adjust the fold position for the bottom segment of letter
fold-out sheets when using the multi-folding unit.
111 [Letter Fold-out Position 2:
1 sheet Fold]
Adjust the overall fold size of letter fold-out sheets when
using the multi-folding unit.
112 [Letter Fold-in Position 1: 1
sheet Fold]
Adjust the fold position of the bottom segment of letter
fold-in sheets when using the multi-folding unit.
113 [Letter Fold-in Position 2: 1
sheet Fold]
Adjust the overall fold size of letter fold-in sheets when
using the multi-folding unit.
114 [Double Parallel Fold
Position 1]
Adjust the fold position of the bottom segment 1 of
double parallel folded sheets when using the multi-
folding unit.
115 [Double Parallel Fold
Position 2]
Adjust the fold position of the bottom segment 2 of
double parallel folded sheets when using the multi-
folding unit.
116 [Gate Fold Position 1] Adjust the fold width of the bottom segment 1 of gate
folded sheets when using the multi-folding unit.
117 [Gate Fold Position 2] Adjust the fold width of the bottom segment 2 of gate
folded sheets when using the multi-folding unit.
118 [Gate Fold Position 3] Adjust the fold position of the bottom segment 3 of gate
folded sheets when using the multi-folding unit.
Menu Items and Functions
111
To Next Page
Loading...
