Setting Items Max. Value Min. Value Step Unit
[Paper Feed Motor Speed Env corr: Low
Temp]
1 -1 0.1 %
[Paper Feed Motor Speed Env corr:
Normal Temp]
[Paper Feed Motor Speed Env corr: High
Temp]
089: [Paper Output Motor Feed Speed]
Adjust the exit motor's speed.
The exit motor drives the rollers at the paper exit.
Press [+] to increase the speed and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Output Motor Feed Speed] 3.0 -3.0 0.1 %
090: [Switchback Entrance Motor Feed Speed]
Adjust the speed of the switchback entrance rollers
Adjust the rollers' speed to deliver paper that is turned over or duplex-printed.
Press [+] to increase the speed and [−] to reduce it.
If you change this setting, increase or decrease the following speeds by the same amount:
• 091: [Exit Switchback Motor Feed Speed: CW]
• 095: [2 Sided Switchback Motor Feed Speed: CCW]
Setting Items Max. Value Min. Value Step Unit
[Switchback Entrance Motor Feed Speed] 3.0 -3.0 0.1 %
091: [Exit Switchback Motor Feed Speed: CW]
Adjust the clockwise speed of the exit switchback rollers.
Adjust the rollers' speed to deliver paper that is turned over.
Press [+] to increase the speed and [−] to reduce it.
4. Details of Menu Items in Advanced Settings
124
To Next Page
Loading...
