023: [Paper Transfer Current: LE Length: BW]
Adjust the area at the leading edge of the paper for application of paper transfer current.
Specify the length of area at the leading edge of the paper to which the current set in 022: [Paper
Transfer Current: LE: BW] is applied.
Use this to reduce image quality degradation at the leading edge of the paper.
Press [+] to increase the length of area at the leading edge to apply the current and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current: LE Length: BW] 30 0 1 mm
029: [Paper Transfer Current: LE Length: FC]
Adjust the area at the leading edge of the paper for application of paper transfer current.
Specify the length of area at the leading edge of the paper to which the current set in 028: [Paper
Transfer Current: LE: FC] is applied.
Use this to reduce image quality degradation at the leading edge of the paper.
Press [+] to increase the length of area at the leading edge to apply the current and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current: LE Length: FC] 30 0 1 mm
024: [Paper Transfer Current: TE: BW]
Adjust the paper transfer current at the trailing edge of the paper when printing in black-and-white
mode.
Specify the paper transfer currents as a percentage of the currents specified in 020: [Paper Transfer
Current: BW: Side 1] and 021: [Paper Transfer Current: BW: Side 2].
Use this to reduce image quality degradation at the trailing edge of the paper.
Press [+] to increase the percentage and [−] to reduce it.
Setting Items Max. Value Min. Value Step Unit
[Paper Transfer Current: TE: BW] 300 5 1 %
030: [Paper Transfer Current: TE: FC]
Adjust the paper transfer current at the trailing edge of the paper when printing in full color.
Setting Values
133
To Next Page
Loading...
