*1
For B5 paper, any adjustment greater than 3 mm is rounded down to 3 mm.
111: [Letter Fold-out Position 2: 1 sheet Fold]
Adjust the overall fold size (L) of letter fold-out sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (L) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
CEZ003
L
S2
Paper feed direction
Setting Items Max. Value Min. Value Step Unit
[Letter Fold-out Position 2: 1 sheet Fold] 4.0
*1
-4.0
*1
0.2 mm
*1
For B5 paper, any adjustment greater than 3 mm is rounded down to 3 mm.
112: [Letter Fold-in Position 1: 1 sheet Fold]
Adjust the fold position of the bottom segment (S) of letter fold-in sheets when using the multi-folding unit.
This setting will not be applied when the multi-sheet fold function is enabled.
Press [+] to increase (S) and [−] to reduce it.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
4. Details of Menu Items in Advanced Settings
152
To Next Page
Loading...
