Ricoh Pro C5200s Operating Instructions

No. Item Description
0704 [Switch Print Screen] Switch to the print screen if you want to output an
alignment pattern to check image misalignment with the
color controller connected.
[Preprocessing: LCT]
For details about the following items, see page 46 "[Preprocessing: LCT]".
No. Item Description
0108 [Wide LCT: Fan Level] Adjust the airflow of the wide LCT for fanning the sheets.
0109 [Wide LCT: Fan Timer] Adjust the duration of the airflow of the wide LCT for
fanning the sheets.
0110 [Pickup Assist] Specify the paper feed roller movement.
[Finishing: Finisher]
For details about the following items, see page 47 "[Finishing: Finisher]".
No. Item Description
0401 [Punch Position: With Feed] Adjust the horizontal position of the punch holes when
using Finisher SR4120 or Finisher SR4130.
0402 [Punch Position: Across
Feed]
Adjust the vertical position of the punch holes when using
Finisher SR4120 or Finisher SR4130.
0403 [Staple Position] Adjust the vertical position of the staples when using
Finisher SR4120 or Finisher SR4130.
0404 [Staple Position for Booklet] Adjust the horizontal position of the booklet staples when
using Finisher SR4130.
0405 [Folding Position for
Booklet]
Adjust the horizontal folding position when using Finisher
SR4130.
0406 [Folding Speed for Booklet] Adjust the speed of center folding by the SR4130
finisher. By reducing the folding speed, you can make
folds crisper.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
22

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes