Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Tray 1]
*1
4.0 -4.0 0.1 mm
[Tray 2]
[Tray 3]
[Bypass Tray]
[2 Sided]
[LCT]
[Paper Weight 1]
[Paper Weight 2]
[Paper Weight 3]
[Paper Weight 4]
[Paper Weight 5]
[Paper Weight 6]
[Paper Weight 7]
[Paper Weight 8]
[Paper Weight 9]
*1
The factory-set value is preset.
• If paper is delivered face-down, turn it over in the paper feed direction and check the image
position.
• For printing from a paper tray with custom paper, the values specified in [Adj Image Position of
Side1 Across Feed] and [Adj Image Position of Side2 Across Feed] within [Advanced Setting] for
the custom paper will be added.
• This adjustment may have no effect, depending on how this machine is configured.
0107: [Erase Margin: Leading Edge/Trailing Edge]
Adjust the mask width at the leading edge, trailing edge, left edge, or right edge of the image.
Setting Values
31
To Next Page
Loading...
