Using the [Maintenance] Menu
You can specify machine maintenance settings for adjusting print quality.
Nozzle Check
Print a test pattern to check that print head nozzles become clogged.
If nozzle problems occur, print head nozzles become clogged and ink cannot be ejected properly.
This will result in lower print quality.
Head-cleaning
You can clean the print head.
Clean the head if certain colors are not printed or are printed faintly.
Head cleaning consumes ink.
Head-flushing
You can clean the print head more thoroughly.
Because head flushing consumes more ink than head cleaning, do it only if the print head cannot
be cleaned properly by head cleaning.
Head Position
You can resolve problems such as lines that are printed vertically misaligned or blurred colors.
Registration
Adjust the print start position of the fabric.
Date/Time
You can specify the date and time.
Key Repeat
The key repeat function allows you to specify setting values in units of ten or scroll the display
quickly by pressing and holding down the [
] or [ /Menu] key.
Holding down the [Adjust Height ] or [Adjust Height ] key allows the height of the cassette to be
quickly adjusted.
Default: [On]
Feed Test
Check how the cassette works. Printing is not performed on the fabric.
Move Print-Heads
Move the print head to make it easier to remove foreign objects stuck in the right edge. When all
operations are completed, turn the power back on and print a [Nozzle Check] test pattern.
Height Adjust
You can adjust the height of the cassette manually.
Using the [Maintenance] Menu
119
To Next Page
Loading...
