Cassette (Multi Tray)
1. Detection Lever
Switch the lever location when using or not using the sleeve attachment. For details, see page 75 "Loading a
Fabric in the Multi Tray" and page 77 "Loading a Sleeve in the Multi Tray".
2. Sleeve Attachment
When printing on the sleeves of T-shirts, attach them on the multi tray.
3. Table
A stand for setting fabrics.
4. Cassette Positioning Line
Align this line with the edge of the machine when installing the cassette.
5. Table Height Adjustment Knob
Turn the knob counterclockwise to release the lock, and then adjust the height of the table. After adjusting it,
turn the knob clockwise to put the lock.
Guide to Components
19
To Next Page
Loading...
