Cannot Recover Error Page
If you resume printing after resetting the garment misfeed error or other errors, printing may not be
correctly performed and a message appears.
Depending on the printing result, resolve the error using any of the following procedures:
If Nothing Printed
If the cassette is not automatically ejected, press the [Tray] key and move the cassette stand to the
front.
Remove the cassette and reload the fabric correctly. After reloading the cassette, press the [Start]
key to resume printing.
If printing does not start, adjust the height of the cassette, and then press the [Start] key.
See page 72 "Loading Fabrics", page 210 "Adjusting the Height of the Cassette".
If Partially Printed
Cancel printing.
See page 106 "Canceling Printing".
Status Monitor Errors
237
To Next Page
Loading...
