Ricoh Ri 100 - Replacing an Ink Cartridge

Checking the remaining ink level on the Status Monitor
The cartridge status can be used to check when to replace the cartridge.
DSA429
1. Open the [Printing Preferences] dialog box.
2. Click the [Maintenance] tab.
3. Click [Display Status Monitor].
4. Check the cartridge status.
• You can specify that the Status Monitor send a notification when the ink will soon run out. To do
this, open the printer driver dialog box, click [Status Monitor Settings] on the [Maintenance] tab,
and then select the [Notify cartridge replacement] check box.
• Be sure to insert the ink cartridges correctly. If you insert them incorrectly, Status Monitor might not
be able to detect the amount of ink that is remaining in the cartridges. See page 186 "Handling
Ink Cartridges".
Replacing an Ink Cartridge
If an error occurs in the printer, resolve it, and then replace the ink cartridge.
• Keep ink and ink containers out of reach of children.
• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if
necessary.
Replacing an Ink Cartridge
183