Ricoh Ri 100 - Registration

10. Press the [ ] or [ /Menu] key to select a resolution from Step 6, and then press the
[#Enter] key.
<Adjustment>
T-shirt Fine
11. Select the items that you need to adjust, and then press the [# Enter] key.
<Adjustment>
1.A
12. Enter the optimal adjustment values from Step 8, and then press the [#Enter] key.
<A>
(-4, +4) 0
13. Press the [Escape] key until the top screen appears.
Registration
Print a test pattern to adjust the print start position of the fabric.
1. Load the print media in the cassette. Align the print media with the corners of the table.
2. Press the [ /Menu] key.
3. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
<Menu>
Maintenance
4. Press the [ ] or [ /Menu] key to display [Registration], and then press the [#Enter] key.
<Maintenance>
Registration
5. Press the [ ] or [ /Menu] key to display [Pr.Test Pattern], and then press the [#Enter]
key.
<Registration>
Pr.Test Pattern
6. Press the [Start] key.
A test pattern to adjust the print start position is printed.
Check the optimal adjustment values on the printed test pattern.
Using the [Maintenance] Menu
127