3. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
<Menu>
Maintenance
4. Press the [ ] or [ /Menu] key to display [Auto Head Maint.], and then press the [#Enter]
key.
<Maintenance>
Auto Head Maint.
The print heads will move to a position where you can clean it.
5. Press the [#Enter] key.
Press # to start
maintenance head
6. When "Remove Tray" is displayed, remove the cassette.
7. When "Set Maint. Kit Press Start key" is displayed, attach the cleaning tool to the cassette
stand.
Push the cleaning tool to the back until it clicks.
8. Press the [Start] key.
Cleaning of the print head nozzles will start automatically. It takes 10 to 15 minutes.
9. When "Remove Maint Kit Press Start key" is displayed, detach the cleaning tool, and then
press the [Start] key.
This machine will return to the usual condition.
Clean Internals
The internal compartments clean automatically. Clean the interior if you do not use the machine for a
long time.
When cleaning the interior, use the optional dedicated cleaning cartridge.
Using the [Maintenance] Menu
137
To Next Page
Loading...
