Removing the Cassette
After printing is completed, remove the cassette once it returns and stops at the position so that you can
see the cassette positioning line on the left side of the cassette.
When the [Start] key is lit up, printing has not yet completed. Press the [Start] key again without
removing or moving the cassette from the machine. Printing starts again.
When using the A4 standard tray or A5 tray, insert the protection cover horizontally as illustrated in the
figure, and then remove it with the A4 standard tray or A5 tray. This prevents you from coming into
contact with the printing surface. Make sure the protection cover is correctly positioned horizontally.
Loading and Removing the Cassette
23
To Next Page
Loading...
