For details about how to adjust the height using the [Adjust Height ] and [Adjust Height ] keys,
see page 210 "Adjusting the Height of the Cassette".
Clean Maint Unit
Move the maintenance unit to a position where cleaning can be carried out. If the message
prompting you to provide regular maintenance appears, clean the Maintenance Unit.
Auto Head Maint.
The print head nozzles clean automatically. If the message prompting you to provide regular
maintenance appears, clean the print head.
Clean Internals
The internal compartments clean automatically. Clean the interior if you do not use the machine for
a long time.
Nozzle Check
Follow the procedure below to check whether the print head nozzles are clogged up or not by printing
a nozzle check test pattern.
1. Load the print media in the cassette.
2. Press the [ /Menu] key.
3. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
<Menu>
Maintenance
4. Press the [ ] or [ /Menu] key to display [Nozzle Check], and then press the [#Enter]
key.
<Maintenance>
Nozzle Check
5. Press the [#Enter] key.
Press # to
print pattern
6. Press the [Start] key.
A test pattern is printed.
7. Press the [Escape] key until the top screen appears.
8. Check the printed test pattern.
Printed Test Pattern
5. Machine Setup Menus
120
To Next Page
Loading...
