3. Printing on T-shirts
This section explains the procedures for printing on T-shirts. In order to create printing data and perform
printing, use the "Design Software" application dedicated for T-shirt printing. For printing procedures
using applications other than Design Software, see page 103 "Printing via the Printer Driver".
About Design Software
Design Software is application software for printing on T-shirts using this machine. You can use this
application by installing it on Windows or Mac.
Operating Environment
Use the Design Software under the following conditions:
• Supported device: Devices running a Windows operating system or Microsoft .NET Framework 4.5
or later, devices running a Mac OS X
®
(iMac
®
, MacBook
®
, Mac mini
®
, etc.)
• Supported operating system: Windows 7/8.1/10 (32-bit/64-bit), Mac OS X 10.10.x or later
• Supported display resolutions: 1280 × 800 or higher
• We cannot guarantee that Design Software operates properly if it is installed on an unsupported
operating system even though it could be installed there.
Installing
Connect the CD-ROM drive to the Windows or Mac and install the Design Software.
1. Insert the CD-ROM into the CD-ROM drive.
If another application software is running, exit it.
2. Click [RICOH Design Software].
3. Follow the on-screen instructions to install the application.
When the Windows security warning appears during installation, ignore it and continue the
installation.
81
To Next Page
Loading...
