Ricoh Ri 100 - Specifying the Type and Thickness of the Fabric

Specifying the Type and Thickness of the Fabric
Operations using the Design Software start from this step. The Design Software has two modes: "Easy
Designer" and "Advanced Designer".
Mode Explanation
Easy Designer In this mode, you can follow the instructions simply on the screen, starting
from designing to printing the T-shirt.
Advanced Designer In this mode, you can use all functions of the application, for example,
adding frames and characters to the image.
In this example procedure, Easy Designer operations are explained.
For details about the functions of the Design Software, see the Design Software Help.
1. Launch the Design Software.
2. Click [Easy Designer].
DSB295
3. Select the type and thickness of the fabric, and then click [Select Tray].
The thickness options change depending on the fabric type.
DSB018
• In the language selection menu on the screen of Step 2, you can select the language.
3. Printing on T-shirts
86