Ricoh Ri 100 - Page 124

When the ink cartridge is empty, replace it instead of performing a print head cleaning. After an ink
cartridge is replaced, a print head cleaning will be automatically performed.
• Do not turn the machine off during print head cleaning. If the machine is turned off during print
head cleaning, start again from the beginning.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
<Menu>
Maintenance
3. Press the [ ] or [ /Menu] key to display [Head-cleaning], and then press the [#Enter]
key.
<Maintenance>
Head-cleaning
4. Press the [ ] or [ /Menu] key to select a color, and then press the [#Enter] key.
<Head-cleaning>
All Heads
To clean all the print heads, select [All Heads].
To clean the print head for cyan and black, select [Head 1].
To clean the print head for yellow and magenta, select [Head 2].
5. Press the [#Enter] key.
Press # to
clean heads
Head cleaning starts.
Maintenance
in process...
6. Press the [Escape] key until the top screen appears.
No-fuss head cleaning
You can perform a one-touch head cleaning for all colors.
5. Machine Setup Menus
122