3. Press the [ ] or [ /Menu] key to display [Clean Maint Unit], and then press the [#Enter]
key.
<Maintenance>
Clean Maint Unit
4. Press the [#Enter] key.
Press # to
clean Maint Unit
5. When "Open Top Cover to clean unit" is displayed, open the top cover.
The Maintenance Unit will move to a position where you can clean it.
6. Wipe off any dirt in the area shown in the figure with the cleaning stick moistened with
the cleaning liquid.
For the top part of the cap (shown in red in the figure), wipe it gently.
1. Wiper (back and front)
2. Lever
3. Cap (side part, top part, and inner part)
5. Machine Setup Menus
134
To Next Page
Loading...
