Ricoh Ri 100 - Page 148

• DHCPv6-Full
• Off
Default: [Off]
IPv6 Statlss Ad
Select whether to enable or disable IPv6 stateless address auto configuration.
• On
• Off
Default: [On]
IPv6 Address
You can specify the machine's IPv6 address.
IPv6 Gatewy.Ad.
You can specify the IPv6 gateway address.
Default: [::]
Active Protocol
Select the protocol by setting the IPv4, IPv6, HTTP (IPv4), HTTP (IPv6), and Web protocols to
[Active] or [Not Active].
• Active
• Not Active
Default: [Active]
IPsec
Specify the machine's IPsec function Active/Not Active.
• On
• Off
Default: [Off]
MAC Address
Displays the machine's MAC address (physical address).
Ethernet Speed
Set the access speed for networks.
Select a speed that matches your network environment. [Auto Select] should usually be
selected.
• Auto Select
• 10Mbps Half D.
• 10Mbps Full D.
• 100Mbps Half D.
5. Machine Setup Menus
146