If the distance between the print head and the fabric is too small, dust might stick to the fabric. If this is
the case, clean both the Maintenance Unit and print head. If the problem is not resolved, enter a positive
value as the height value.
When the distance between the print head and the fabric is suitable, the printed image is satisfactory as
shown in the figure.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
3. Press the [ ] or [ /Menu] key to display [Height Adjust], and then press the [#Enter] key.
4. Press the [#Enter] key.
9. Troubleshooting
212
To Next Page
Loading...
