Ricoh Ri 100 - Page 223

• On the [Detailed Settings] tab, select [Driver Options], and then select the [Spool Data in EMF
Format] check box.
• On the [Detailed Settings] tab, select [Print Quality], and then clear the [Adjust Photographs] and
[Smooth Low Resolution Images] check boxes.
• On the [Detailed Settings] tab, select [Print Quality], and then select the [Change Data Processing]
check box.
Some characters are garbled or missing.
• On the [Detailed Settings] tab, select [Driver Options], and then select the [Spool Data in EMF
Format] check box.
• On the [Detailed Settings] tab, select [Print Quality], and then select the [Change Data Processing]
check box.
Some characters are printed faintly or not printed.
• In the [Select Print Quality:], select [Vivid]. If [Vivid] cannot be selected, select [Fine].
• On the [Detailed Settings] tab, select [Driver Options], and then select the [Spool Data in EMF
Format] check box.
• On the [Detailed Settings] tab, select [Print Quality], and then select the [Print All Text as Black]
check box.
Printing is slow and takes time, which delays release of the application.
• In the [Select Print Quality:], select [Speed], and then print.
• On the [Detailed Settings] tab, select [Driver Options], and then select the [Spool Data in EMF
Format] check box.
• On the [Detailed Settings] tab, select [Print Quality], and then clear the [Adjust Photographs] and
[Smooth Low Resolution Images] check boxes.
• Close the resident application.
Printing stops halfway.
View the Status Monitor to check whether an error has occurred.
See page 229 "Status Monitor Errors".
Ink smudges and characters are not properly formed when printing white text on a black
background.
In the [Select Print Quality:], select [Speed], and then print.
The characters printed in yellow on a black fabric are faint.
To reproduce the detail of the image, try the following:
• Change the application you are using to print
• Edit the data
Print Results Are Not Satisfactory
221