4. Once the cassette returns to the front side of the machine, remove the cassette.
• While the [Start] key is lit, printing has not been finished. Press the [Start] key again without
removing or moving the cassette from the machine. Printing resumes.
• When using the A4 standard tray or A5 tray, insert the protection cover horizontally as
illustrated in the figure, and then remove it with the A4 standard tray or A5 tray. This prevents
you from coming into contact with the printing surface. Make sure the protection cover is
correctly positioned horizontally.
5. Finish the Design Software.
• By clicking [Print One More], you can configure the layout settings again for the image
loaded.
• Clicking [Back to TOP] discards the loaded image and returns you to the top screen of the
Design Software.
3. Printing on T-shirts
94
To Next Page
Loading...
