The drawing plate states:
Drawing number
Product plate
Figure 2-11: Example of product plate
The product plate states:
Production number
2.6.2 Quality control
Every Ridder Growing Solutions is checked and tested for correct operation before
shipment. The corresponding certificate can be found in the documentation included
with the unit.
When the FertiMiX-Go! has been checked, it is labelled with a control sticker. You will
find this sticker on the inside of the cabinet.
Figure 2-12: Example of control sticker
The stickers shows:
Name of inspector
Date inspected
Inspector’s signature
Please contact Ridder Growing Solutions if this label is missing.
2.6.3 Component stickers
You will find an identification sticker on the main components of the FertiMiX-Go!. The
following table below provides an overview:
FertiMiX
22
To Next Page
Loading...