Figure 6-8: You can set the volume and the duration for each predefined period.
Tap volume (or duration) in a period. A pop-up window appears.
Set the volume in litres in (or the duration in seconds).
Tap the Confirm icon ‘ '.
You have set the volume (or duration).
6.3.6 Fertilizer and acid dosing
A pH Smart Switch is required in order to dose acid. You can use an EC Smart Switch
for fertilizer dosing.
Use a Smart Switch EC to dose fertilizers based on EC.
If using more than one fertilizer when dosing fertilizer based on EC, you will need to
set the dosing ratio.
The HortiMaX-Go! supports up to four fertilizer dosing channels. To set the
number of fertilizers, navigate this path: .
If you have agitators in your fertilizer tanks, the settings to control the
agitators can be found under:
.
This requires an Agitator Smart Switch.
EC and pH dosing
You can set the EC and pH target values on the settings screen for automatic
irrigation. To set the dosing ratios, navigate this path:
. The EC and pH settings are listed at the bottom; use
the arrow down button to get to these settings.
FertiMiX
50
To Next Page
Loading...