Ridder FertiMiX-Go! - Packaging, Storage and Shipment

NEN-EN-IEC 62368-1:2014 en
NEN-EN-IEC 61000-6-1:2007 en
NEN-EN-IEC 61000-6-3:2007 en
NEN-EN-ISO 12100:2010 en
NEN-EN-IEC 60204-1:2006 en
NPR-CEN Guide 414:2014 en
2.7 Packaging, storage and shipment
2.7.1 Packaging
The FertiMiX-Go! is shipped in one or more large pieces and includes a number of
boxes containing separate components.
2.7.2 Transport
To prevent damage during transport, certain components are shipped separately.
Make sure that these components are installed correctly.
Please consider your own safety and that of others when loading, unloading and
moving the unit.
Be particularly mindful of the risk of the unit falling or sliding accidentally. Only
use vehicles that are suitable for transporting the FertiMiX-Go!. Please take
into account the weight and centre of gravity of the FertiMiX-Go! during
transport.
The dimensions of the " Basic configuration" on page11 are provided in
section FertiMiX-Go!.
2.7.3 Storage
Store the product and the separate components in a dry and dust-free environment.
Do not expose products to direct sunlight. Keep the various components in their
original packaging for as long as possible. Section "Installation requirements" on
page28 provides a complete overview of the requirements for installing the FertiMiX-
Go!.
Please also read the warning in section "Connecting pH sensor" on page33.
This warning applies specifically to the transport and storage of the pH
sensor.
FertiMiX
24